How To Connect Microphone To Ipad Garageband

1. How To Connect Microphone To Garageband Ipad
2. How To Connect Microphone To Ipad Garageband Download
3. How To Connect Microphone To Ipad Garageband Youtube
4. How To Use Garageband

Apr 30, 2009  Hey guys, I can't figure out how to use a new microphone with garageband. It plugs into the line-in part on my gf's MBP (the one next to the headphone port, right?), and i choose 'Line-In' from the sound preference pane. But it's still using the internal mic when recording on garageband.

GarageBand User Guide for iPad

Using the Audio Recorder, you can record your voice, an instrument, or any other sound using the microphone on your iPad, and play it back in GarageBand. You can also record sounds using an external microphone connected to your iPad.

The Audio Recorder has two sets of controls you can use to change the sound. Fun view lets you quickly change the sound of your recording, while Studio view gives you more options to enhance your recording.

Switch between Fun and Studio view

• Tap the Fun or Studio button at the top of the Audio Recorder.

Record a sound

1. Tap the Record button in the control bar.

2. Play, sing, or make sound into the microphone.

3. When you are finish, tap the Play button in the control bar to stop recording. Tap the Play button again to hear your recording.

Adjust the microphone input level

While you record, the In level slider on the left shows the input level from the microphone. If the level turns red, drag the slider down (or record the part again more softly) to prevent distortion.

1. Drag the In level slider up or down to set the input level.

   The In level slider is available if your iPad or input source supports input level control.

2. If the input device supports left and right channels, tap Channel button under the In level slider, tap Input 1 or Input 2 to select the input channel, or tap Stereo to record in stereo.

Set the input level automatically

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPad, the input level can be set automatically.

• Tap the Input Settings button , then tap the Automatic switch.

Reduce unwanted noise

You can use a noise gate to reduce low-level input noise when you record. A noise gate cuts off the sound when it falls below a certain minimum level.

1. Tap the Input Settings button , then turn Noise Gate on.

2. Drag the Noise Gate slider until the noise stops or decreases to an acceptable level.

Turn on monitoring for an external microphone

When an external microphone or other audio device (such as a headset or an audio interface) is connected to your iPad, the Monitor button under the Out level slider becomes active.

• Tap the Monitor button to turn monitoring on. Tap the button again to turn monitoring off.

Change the sound using a preset

The Audio Recorder includes presets that appear after you record a sound. Each preset adds an interesting character to the recorded sound.

1. Do one of the following:

   • In Fun view, tap or turn the dial to select one of the presets.

   • In Studio view, tap the icon in the middle of the screen and choose a preset from the list.

2. Turn the knobs to change the sound of the preset.

You can try out different presets by tapping them and turning the knobs.

Set the key and scale for Extreme Tuning

The Extreme Tuning preset is a popular vocal effect that changes the pitch of your recording based on your song’s key and scale settings.

• Tap the Settings button , tap Key Signature, then tap a new key or a different scale (major or minor).

How To Connect Microphone To Garageband Ipad

If the actual key or scale of your song differs from the key or scale setting, the effect might be less pronounced, or might change the pitch of individual notes in undesirable ways.

You can connect real instruments, such as electric keyboards and guitars to your Mac for use in GarageBand. Using real instruments with GarageBand produces not only better sound, but realistic practice, as you finger the actual instrument and not an on-screen keyboard/string set.

You can connect a real MIDI keyboard through a USB cable (on most newer gear) or a MIDI adapter (on older equipment). You can connect other MIDI instruments, including guitars, woodwinds, and drums, and record onto a real instrument track in GarageBand. Click the red Record button when you’re ready to rock. Move the playhead to just before where you want to start jamming.

How To Connect Microphone To Ipad Garageband Download

MIDI is geek shorthand for Musical Instrument Digital Interface, a standard that has been around for years.

If the high-quality instrument you have in mind is your own singing voice, connect a microphone (in lieu of the Mac’s built-in microphone) to an audio input port on the computer.

Open System Preferences, click Sound, click Input, and then select Line In. Drag the Input volume slider to an appropriate level. Choose Vocals and the instrument that most closely matches your singing style, such as Epic Diva, Helium Breath, or Megaphone. Garage Band will tailor the effects to your voice.

How To Connect Microphone To Ipad Garageband Youtube

Don’t worry if you don’t know how to characterize your singing voice; one of your other options is No Effects.

Good microphones are also useful when you’re recording podcasts. If you choose to use a microphone not for singing but for recording your speaking voice, set the option to No Effects (unless you’re going for a comedic effect).

To add the instrument to a recording, click the Create a New Track (+) button, choose Track→New Track, then select Real Instrument and click Create.

How To Use Garageband

Choose an input source (stereo or mono), depending on how the instrument is connected to the Mac. Select Monitor from the pop-up menu to be able to hear the instrument as you play it, with or without feedback.